Phrozen Engineering Series: Start Solving Daily Engineering Issues by SLA 3D Printing !
Specification & Performance
- Weight: 500g per bottle
- XY Resolution: 0.047 mm
- Layer Height / Parameter: 12 sec @ 50 um
- Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
- Compatible Printer: Phrozen Shuffle, Shuffle XL, Make, Make XL
Application: Engineering Components
- Key Performance:
- Viscosity: 890 cps (25C)
- Density: 1.25 g / cm3
- Tensile Stress (Break): 150 MPa
- Elongation: 2.1%
- Tensile Modulus: 1.62 GPa
- Hardness: Shore 82D
- Heat Deflection Temperature @0.45MPa: >150C
About Resin Operation
- Avoid sun light exposure.
- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.